Click image to view full size image
General Description
Inconel X-750 is a nickel-chromium alloy similar to Inconel 600 but made precipitation-hardenable by additions of aluminum and titanium. It has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300°F (700°C). Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines, pressure vessels, tooling, and aircraft structures.
Chemical Composition
Specifications
Physical Properties
Mechanical Properties
Size Range
Inconel X-750 is available as wire, strip, sheet, rod and bar. In the wire form, this grade is covered by specification AMS 5698 for No. 1 Temper and AMS 5699 for spring temper grade. No. 1 Temper has a higher service temperature than Spring temper, but lower tensile strength.
Inconel X-750 Wire: ¢0.1mm-¢9mm (AMS 5698 and AMS 5699)
Inconel X-750 Bar: ¢11mm-¢200mm
Inconel X-750 Strip: 75-110mm*0.15-22mm
Inconel X-750 is a nickel-chromium alloy similar to Inconel 600 but made precipitation-hardenable by additions of aluminum and titanium. It has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300°F (700°C). Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines, pressure vessels, tooling, and aircraft structures.
Chemical Composition
|
Grade |
Ni% | Cr% | Nb% | Fe% | Al% | Ti% | C% | Mn% | Si% | Cu% | S% | Co% |
| Alloy X-750 | Max 70 | 14-17 | 0.7-1.2 | 5.0-9.0 | 0.4-1.0 | 2.25-2.75 | Max 0.08 | Max 1.00 | Max 0.50 | Max 0.5 | Max 0.01 | Max 1.0 |
Specifications
| Grade | UNS | Werkstoff Nr. |
| Alloy X-750 | N07750 | 2.4669 |
Physical Properties
| Grade | Density | Melting Point |
| Alloy X-750 | 8.28 g/cm3 | 1390°C-1420 °C |
Mechanical Properties
| Alloy X-750 | Tensile Strength | Yield Strength | Elongation | Brinell Hardness (HB) |
| Solution Treatment | 1267 N/mm² | 868 N/mm² | 25% | ≤400 |
Size Range
Inconel X-750 is available as wire, strip, sheet, rod and bar. In the wire form, this grade is covered by specification AMS 5698 for No. 1 Temper and AMS 5699 for spring temper grade. No. 1 Temper has a higher service temperature than Spring temper, but lower tensile strength.
Inconel X-750 Wire: ¢0.1mm-¢9mm (AMS 5698 and AMS 5699)
Inconel X-750 Bar: ¢11mm-¢200mm
Inconel X-750 Strip: 75-110mm*0.15-22mm